Usable energy at load
752 kWhUPS & Battery Runtime
Model theoretical battery support time using load, usable discharge fraction, and inverter efficiency.
Free · Manual inputs · No sign-in- 01Set the assumptions
4 inputs. Replace the examples with values for your scenario.
- 02Explore the result
Change an input to see how the estimate responds.
- 03Check the source
Use the formula and limitations below before acting.
Build your scenario
Enter illustrative values. Everything runs locally in your browser; this tool does not send your scenario to a server.
Average critical load supported by this battery system.
Nameplate energy across the available battery strings.
Nameplate battery fraction available for discharge.
Estimated percentage of stored electrical energy delivered to the load.
Example values are for demonstration only, not detected site, circuit or contract settings.
Your results
Theoretical runtime
90.24 minutesTheoretical runtime
1.5 hoursRequired energy for 30 minutes
250 kWhUsable output energy (kWh) = battery nameplate kWh × usable fraction × inverter efficiency; runtime (hours) = usable output energy ÷ supported kW.
Actual UPS runtime is nonlinear and affected by battery chemistry, discharge rate, age, temperature, BMS settings and manufacturer discharge curves. Not a life-safety or resilience guarantee.
Ready for a deeper answer?
Free calculators model numbers you supply. A future paid workflow will connect source-cited contract terms, billing reconciliation, expert verification and reporting—subject to security and acceptance approval. No paid service is activated here.